0

Ihr Warenkorb ist leer

4.83 (12 Rezensionen)

FUSION 2.0 Motocross Grips mit Fusion Bonding System

Farbe

Kein Draht, kein Kleber, kein Gleiten

Wenn du ein Schmutzrad fährst, weißt du, wie es ist, einen Griff zu haben, der rutscht.Trotz all Ihrer Bemühungen, den Griff zu kleben und zu befestigen, rutscht er gewöhnlich.Nur der Prozess des Klebens und Verkabelung Griffe kann auch ein Aufwand sein.Der Draht bricht oft während der Installation, und wenn er einmal installiert ist, gibt es oft einen scharfen Punkt, der Verwüstung auf Ihren Händen verursacht.Darüber hinaus ist der Klebeprozess ein Durcheinander und es ist unmöglich, eine gleichmäßige Abdeckung zwischen Ihrem Griff und der Stange zu bekommen.Risk Racing hat eine einfache und effektive Lösung Grip Bonding System namens Fusion geschaffen.

Stufe 1 der Fusion Grip Bonding SystemReinigen Sie die Bar und beginnen Sie, Klebestreifen zu platzieren.
Stufe 2 der Fusion Grip Bonding SystemDie Klebestreifen auf die Stangen schälen und auftragen, etwas am Ende in die Stange drücken.
Stufe 3 der Fusion Grip Bonding Systemdie Klebestreifen mit der Fusion Spray besprühen.
Stufe 4 der Fusion Grip Bonding SystemEinfach Ihren Griff an die Stelle schieben und nach 10-15 Minuten werden die Griffe an Ihre Stangen gebunden.


Risk Racing Wave Grip Ergonomie

Ergonomie der Welle

Der große Flansch des Moto-Griffes hat eine leichte Biegung.Diese Biegung senkt die Druckpunkte zwischen den Fahrern im Kombi-Modus; Daumen und Griffflansch, wodurch Blasen auf der Seite des Daumens vermieden werden.

Gripping Ribs

Der Moto-Griff weist drei minimale, aber sinnvolle Rippen auf der unteren Seite des Griffes auf.Diese drei Rippen interagieren mit Ihren letzten beiden Fingern, die den größten Teil der Greifkraft in Ihrer Hand bieten.

Fusion Moto Grips Rippen
Ende der Risk Racing Fusion Grips

Dual Compound

Premium, doppelter Verbundgriff mit großer Vibrationsdämpfung und Langlebigkeit. Die Enden dieser Griffe sind doppelt ummauert, um Beschädigungen bei Spitzenübergängen zu verhindern.

Verbindungssystem für Fusion

Die Fusion Grips beinhalten das Fusion Bonding System Kit.Zuerst wirkt der Fusion Spray als Schmiermittel für eine einfache Griffmontage, aber nach dem Trocknen schafft er eine dauerhafte Bindung.Der gesamte Prozess ist sauber und einfach, und Bindungen in etwa zehn-15 Minuten.Das Entfernen der Griffe ist der gleiche Prozess wie jeder andere Griff.

Verbindungssystem für Fusion
Risk Racing Europe Rider Racing Fusion Grips


Features

Ergonomische "Wave" Flange

Zwei Finger in den Rippen

Mikrotextur mit doppelter Verbindung

Doppelummantelte Griffendschutz

Verbindungssystem für eine schnelle, rutschsichere Installation

Was enthalten ist

Risk Racing Fusion Grip
Moto/ATV Grip Pair

Wahl von MOTO, ATV/MTB

Trennstreifen und Katalysatorspray für Fusion-Bonding
Verbindungssystem für Fusion
2x Klebestreifen, 1x Katalysator Spritzflasche



California Prop.65 ACHTUNG:
Dieses Produkt kann Sie Bisphenol A aussetzen, das dem Staat Kalifornien bekannt ist, Geburtsfehler oder andere reproduktive Schäden zu verursachen.Weitere Informationen finden Sie unter www.P65Warnings.ca.gov.






California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.



4.83
12 Rezensionen
5
(11)
4
(0)
3
(1)
2
(0)
1
(0)
Teilen Sie Ihre Erfahrungen
Michael Salsman
2019-12-31
Easy to apply and never had a single.problem or have never had grip move...
Nick C.
2018-03-13
At first I thought the special paper and spray were just another useless grip “glue” that didn’t work. I WAS WRONG! It was extremely easy and works amazingly! Even better was that it left no mess! I highly recommend them!
Dominique Rowles
2017-01-25
Talk about taking the frustration out of putting new grips on the bike. Couldn't believe how easy they were to install. You really don't need any glue or wire, they just slide right on. Crazy cool.
Skyler K.
2019-05-02
The adhesive pads instead of having to use glue is great and the grips work great only disappointment was the ring on the throttle side ripped right off first thing when installing so try not to pull on it at all.
Doug H.
2018-03-02
The grips are great the installation is quick and easy. If you're at the track and rip a grip off 2 minutes later you are good to go. Only grips I will use period!
Tom86
2016-09-07
I swore by the old ones, but the new ones are great. They feel really good in the hand. and just like the other version it was easy to install.
Chandler Gruitupo
2019-01-24
Im going to be honest, most grips are hard to install for me. Not these, the adhesive strip makes these grips a breeze to put on. Not to mention that when it is time to put on a new set of grips the strip doesn't leave a sticky reside from the glue!
Becca Sampson
2017-07-17
They were so easy to install! Just like the video!
Nick C.
2018-10-10
I’ve been using these grips for about a year or so now and love them, easy install, easy change, easy everything, and no glue, paint, or wire needed.... there the best, but last time I put them on the flange ripped right off when installing them, had to bust out the spray paint and put a leftover pro taper grip on, no big deal cause every grip does this every once in a while, I will still keep buying them though because customer service and how they support riders is amazing! I would recommend to anyone any day.
Lincoln Scott
2017-07-14
There are the easiest pair of grips that i have ever used!
Edmund B.
2018-05-02
Excellent easy to install The last set of these grips lasted me a year
motochick98
2017-04-07
I have never used a simpler grip. It's usually really hard to install and these took 3 mins or less and are comfortable. I also like that I can buy them in colors- Green!!!
Product image

FUSION 2.0 Motocross Grips mit Fusion Bonding System

CHF 24.00
In den Warenkorb